7 Tips for Safe and Secure Construction Jobsite

0

It is not a secret that working at a construction Jobsite is the real deal. It is not only risky but, dangerous too, due to so many unexpected hazards. Workers and employers both need to work cautiously and wear protective gear. According to research, the rate of fatal injury is much higher here than any other industry. And this is significant because around 6.5 million people work at the 252,000 construction sites.

Indeed, Jobsite safety and security should be the number one priority for any company. Usually, the hazards occur abruptly without warning because of fall-outs, excavation, sudden electric failure or shock, and many more other reasons. Therefore, its OSHA’s responsibility to ensure that all the construction sites are taking active steps to control such incidents. They must follow all the safety guidelines to minimize these kinds of risks and save the workers from any harm. By doing so, not only human lives will remain safe, but the workers will do their work more efficiently. Also, construction projects will not stop or get delayed due to unwanted disturbances.

While finding ways to secure the construction site for workers and employers, we need to consider the factors that are causing these accidents and then devise a plan accordingly. For instance, an abrupt failure in the electricity or dim lighting at the site can be hazardous. We can keep the job site lit at all times by using a backup generator like the one from krugerpower.com.au, which will keep the lighting up even after a sudden power failure. Another major problem is Excavation hazards, which we can control by making protection hats compulsory at the job site.

Let’s discuss some highly valuable tips by which we can make a construction job site safe and secure for everyone:

1. Save Workers from Excavation Hazards

Source: Health & Safety Blog

Excavation hazards are notably dangerous and cause some severe injuries. Now it is time to start taking them seriously. Make it compulsory to wear head protection while working in a trench. Educate and train workers, so they protect themselves from falling materials, harsh weather, and heavy equipment misfortunes. Another thing one should keep in mind is not to enter the excavation before the inspection. Also, do not stand below the loads that are being carried by heavy machinery. And do not forget to place the protective systems five feet deep over excavations by ramp or ladder.

2. Add Reliable Lighting

Source: Guardian Booth

We all know that a sudden power failure can cause serious consequences. So, it is better to install high power generators everywhere that will provide safety from obnoxious accidents as well as keep the vandals away. In this way, workers at night shifts can perform their duty with a piece of mind.

3. Use Fall-out Protection Systems

Source: Psymbolic

People often take fall-out protection for granted. They perform the operations without wearing safety gear, which lands them in trouble. Well, it is also the responsibility of employers to install a fall-out protection system at the construction site. We cannot put human lives at risk, so make sure these systems are in good working order. Such a system includes guardrails, safety nets, and much more. It protects the people from befalling into holes, elevator shafts, or skylights.

4. Provide Safety Training

Source: YouTube

For the people who do not know, most of the fatalities at the construction job site occur due to falling. So, it has become increasingly vital to give training to the workers to protect themselves from falling. The personal fall out protection system is of no value if they do not know how to use it. They should also know the ways by which they can reduce these falling hazards, which is possible by training only.

5. Make the Use of Eye and Face Protection Mandatory

Source: Paulvic Safety Store

Working in construction is not an easy task. Every day workers are dealing with a variety of materials like acids, flying materials, molten metals, and much more. So, before getting your eyes and face exposed to such hazards, start wearing the protection for face and eyes that are recommended by OSHA. The companies are responsible for providing these face and eye protection to every worker. They should make it compulsory to wear during working hours.

6. Don’t Ignore Head Protection

Source: Water Design-Build Council

If you want your workers to stay protected from electrical shocks and falling objects, then go for hard hats. They play a very significant role at the job site. That is why workers have to wear them as soon as they enter a construction area to avoid any head injury. Such hats should be free from any dent, crack, or deterioration for complete safety.

7. Aerial Lifting must be Done Carefully

Source: BIS Training Solutions

The process of Aerial Lifting of materials and personnel is commonplace at a construction site. Workers have to operate these aerial ladders and vertical towers. Hence, they need to be experts in handling them. The hazards of aerial Lifting involve fall from the ladder, electric shocks, tip-over, hit by the ceiling, or by other subjects. So, train the workers carefully and only after it, let them run it.

Conclusion

Everyone knows that serving at such a site is a risky job. It can cause severe injuries to workers if they do not follow the safety protocols. Therefore, employers and workers should both follow the guidelines and the above tips to foster a safe and protected environment for all.

LEAVE A REPLY

Please enter your comment!
Please enter your name here